Chicago and North Western R-1 Class
Chicago and North Western R-1 class | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() 1907 builder's photo of C&NW R-1 No. 1384 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The Chicago and North Western R-1 class was a class of 325 4-6-0 "Ten-Wheeler" steam locomotives built by the Schenectady Locomotive Works, the American Locomotive Company, and the Baldwin Locomotive Works from 1901 to 1908. The R-1 locomotives were so large and so heavy that the Chicago and North Western (C&NW) Railroad had to extensively rebuild their trackage, bridges, tunnels, turntables, and enginehouses to accommodate them.
The R-1's were widely considered to be one of the most reliable classes of locomotives on the C&NW's roster. They were able to travel all across the C&NW system by the 1940s, and they received varying modifications, including superheater installations and conversions to burn oil. The R-1 class also served as the basis for the Chicago, St. Paul, Minneapolis and Omaha (CMO) Railway's I-1 and K-1 classes. As of 2024, only three R-1 locomotives are preserved; two are undergoing restoration to operating condition, while one remains on static display.
History
[edit]Development
[edit]After the year 1900, railroad traffic in the United States was constantly growing, and existing locomotive rosters and rail infrastructures were becoming inadequate.[2] By that time, the Chicago and North Western (C&NW) Railroad experimented with various firebox designs on steam locomotives, to meet the demand for greater motive power.[2] They rostered 250 4-6-0 "ten-wheeler" locomotives that were divided into seven classes, including the R class locomotives built between 1897 and 1900, and they all came with larger fireboxes that were placed above the frame, as opposed to in between the frame and the wheels.[2] This allowed for a larger grate area and a larger fire.[2]
In 1899, the C&NW created a new boiler design with a 56-inch (1,422 mm) wide firebox, 16-foot (5 m) long boiler tubes, and a 200 psi (1,379 kPa) boiler pressure.[3] The following year, this boiler design was applied to the first of the railroad's D class 4-4-2 "Atlantic" type locomotives.[3] With the D class 4-4-2s earning recognition for their good performance, a freight locomotive design with the new boiler was being developed.[3][4]
Design and construction
[edit]The new locomotive design was destined to be an upgrade to the R class, with its classification name being the R-1.[2][3] The R-1 design was to be equipped with 63-inch (1,600 mm) diameter driving wheels, and the boiler and firebox were to be lifted and carried over the driving wheels.[3][4][5] The rear section of the R-1 boiler with the firebox was to be larger than that of the D class at 74 inches (1,880 mm) in diameter, while the front section of the boiler was to be smaller at 66 inches (1,676 mm).[4] The cylinders were to be 21 inches (533 mm) in diameter, making the cylinders the largest to ever be applied to a C&NW locomotive at the time.[4]
On January 1, 1901, the C&NW placed their first order of twenty R-1 locomotives to be built by the Schenectady Locomotive Works (SLW).[4][6] Additional orders of R-1's would be made, following SLW's merger into the American Locomotive Company (ALCO).[6][7][8] Aside from the new boiler design, a new valve design, larger cylinders, and innovative steam generating equipment, the first twenty-seven R-1 locomotives shared identical construction qualities with the R class.[4]
In the fall of 1902, with the availability of technilogical improvements, the C&NW made multiple alterations to the R-1 design; four-bar crosshead guides were replaced with alligator crosshead guides, bolts were replaced with rivets for the boiler, and cast iron was replaced with steel for multiple parts of the locomotive.[4] The alterations added 2,000 pounds (907 kg) of weight for the locomotive, with the driving wheels bearing a large portion of it.[4] ALCO built and delivered thirty R-1 locomotives with the new alterations in 1902 and 1903, with an additional forty-five being delivered from the Baldwin Locomotive Works (BLW); BLW marked their R-1's as 10-36-D in their classification system.[4][9][8]
The first fifty-seven R-1 locomotives were built with tenders that held 5,400 U.S. gallons (20,441 L) of water and 9 tonnes (8.9 long tons; 9.9 short tons) of coal; they were smaller than the tenders of the R class.[10] The tenders were built at a smaller scale, because most C&NW turntables at the time were found to be too short to fit an R-1 with a longer tender.[10] BLW's forty-five R-1's from 1903 were built with tenders that held 6,000 U.S. gallons (22,712 L) of water and the same coal capacity as the older tender design.[10] Beginning in 1905, the rest of the R-1 locomotives would be built with larger tenders that would hold 7,500 U.S. gallons (28,391 L) of water and 10 tonnes (9.8 long tons; 11.0 short tons) of coal.[10]
In September 1904, the C&NW asked ALCO to construct one D class 4-4-2 (No. 1300) and one R-1 class 4-6-0 (No. 76) with superheated boilers.[4][11] After they entered service, the C&NW became unsatisfied with their performance, and no further D's or R-1's were built new with superheaters.[11]
Most R-1 locomotives were applied with Stephenson valve gear, but the increased size of the axles and strength requirements resulted in greater wear and tear on the Stephenson eccentric rods on the R-1's running gear, despite the later locomotives being built with improved metal.[11] At the same time, Walschaerts valve gear was beginning to make an impact on American steam locomotive technology.[12] In early 1907, the C&NW placed an order of thirty R-1's from ALCO, and in doing so, they asked for five of the locomotives (Nos. 1393–1397) to be applied with Walschaerts valve gear for testing.[12][13]
While the Walschaerts application made the five locomotives several thousand pounds (kg) heavier than any Stephenson-powered R-1, their performance was deemed a success.[12][14] The C&NW subsequently asked BLW and ALCO to build and deliver thirty-five (ten from BLW; twenty-five from ALCO) additional Walschaerts-powered R-1's throughout 1908.[15][14][16] By the time production on the R-1 class ended in December 1908, 325 locomotives of the class were built, making the R-1's the most manufactured class of steam locomotives on the C&NW.[17]
Year | Quantity | Manufacturer | Serial numbers | C&NW numbers | Notes |
---|---|---|---|---|---|
1901 | 16 | Schenectady | 5844–5859 | 168/78, 287/89–91/95, 896, 910–12/22/39, 1041/42 | |
1901 | 4 | Schenectady | 6206–6209 | 160, 594–596 | |
1902 | 14 | Alco | 25397–25410 | 1066–1079 | |
1902 | 9 | Alco | 26530–26538 | 1102–1110 | |
1903 | 14 | Alco | 27581–27594 | 1111–1124 | |
1903 | 45 | Baldwin | 22509/19/39/40/63/67/68/76, 22624/25, 22701/18/58/65/73/80, 22818/24/35/43/61/64/86, 22909/35/36/50/71/94, 23004/25/32/67/68/83/84/94, 23102/16/17/25/34/55/84, 23217 |
1125–1169 | |
1905 | 18 | Alco | 30299–30316 | 76, 416/41/51/54/66/78/76/81/83, 236/37, 479, 916/17, 462/63 | |
1905 | 15 | Alco | 30595–30609 | 469–474/80/84–91 | |
1906 | 30 | Alco | 38513–38542 | 411–14/17/18/22–25/29/40/42/44–49, 899, 915/23/24, 1219–1222/29–31 | |
1906 | 35 | Alco | 39212–39246 | 1333–1367 | |
1907 | 30 | Baldwin | 31547–49/59–62/85–88, 31618–23/73/87/88, 31734/45–47/84, 31830/55/56/84, 31914 | 18, 29, 38, 44, 50, 61, 62, 122/59/61/82/84/85, 245, 343–45/48/49/59/60, 452, 555, 925/34–38/60 | |
1907 | 30 | Alco | 42170–42199 | 1368–1397 | |
1907 | 30 | Alco | 42399–42428 | 1398–1427 | |
1908 | 10 | Baldwin | 32567/74/94, 32602–04/26/45/60/61 | 1323–1332 | |
1908 | 25 | Alco | 45726–45750 | 172/75, 375–80/82/83/85/86/88, 406/50/53/55–58, 893/94, 926/27/52 |
Service
[edit]The R-1 locomotives were primarily designed as dual-service locomotives to pull both passenger and freight trains.[5][18] Because the R-1's were larger and heavier than any other C&NW locomotive before them, their route availability was drastically limited, so the C&NW initiated a program to upgrade their entire rail infrastructure to accommodate them.[5][17] The railroad rebuilt several miles of rail lines and bridges with enough heavy weight to support an R-1.[5][17] Existing roundhouse stalls proved to be too short for the R-1's to fit inside, so some of them were extended to allow the R-1's to be serviced indoors, and bigger roundhouses and terminals were eventually constructed to allow room for larger locomotives.[17]
By the end of 1902, the R-1's were allowed to operate on certain routes on the Wisconsin Division, but they were restricted from running anywhere on the Iowa and Minnesota divisions, until 1910.[17] By the 1920s, the C&NW had completed many miles of track upgrades for use by the R-1's, but the locomotives were still restricted from running on certain branchlines, due to short, light-weight turntables; some turntables were replaced with extended wye tracks for easier turning.[17] In 1939, the railroad's program to upgrade their rail infrastructure for the R-1's had ended; by which time, the R-1's limited route availabilities continued to extend, until they were permitted to travel anywhere on the C&NW system, when necessary.[17]
When steam-heated passenger cars became common on branch lines, several of the R-1's could not pull passenger trains, due to their lack of steam-heating equipment.[18] All forty Walschaerts-powered R-1's were built with steam-heating and air signal line equipment, so they were assigned to passenger service for most of their working spans.[18] Some R-1's were also used to pull the C&NW's "Flambeau 400" connection trains between Watersmeet, Michigan and Monico, Wisconsin.[19] While the C&NW acquired larger locomotives after 1908, such as the Z class 2-8-0 "Consolidations" from 1909, the J class 2-8-2 "Mikados" from 1913, and the H class 4-8-4 "Northerns" from 1929, none of them could replace the R-1's on many of the railroad's routes, due to weight restrictions.[5][6][20] After 1920, the R-1's were primarily relegated to branch line services, but they were still occasionally used to pull mainline trains and for switching services.[5]
Modifications
[edit]After testing five E class locomotives in 1910, the C&NW decided that superheated technology had improved for steam locomotives, so they began to modify their existing steam fleet with superheated boilers, with the R-1's receiving superheaters, beginning in 1915.[21] By the 1930s, all the R-1 locomotives were equipped with superheaters.[21] In 1915, the railroad made plans to rebuild some of the R-1's with larger cylindrical boilers, with the front section to be 72 inches (1,829 mm) in diameter.[21] Despite the intervention from World War I and the United States Railroad Administration (USRA), the C&NW moved forward with the cylindrical boiler installations, with the process beginning in 1922.[21]
Beginning in 1911, the C&NW converted several of the R-1 locomotives from coal-firing to oil-firing, in order for them to operate west of the Missouri River.[10] At least eighty-seven locomotives were known to have been converted to burn oil at some point in their working spans.[22] While the R-1's received many other varying modifications during their working spans, none of the Stephenson-powered R-1's were rebuilt with Walschaerts valve gear, and only one locomotive with four-bar crosshead guides was rebuilt with alligator crosshead guides.[10]
Withdrawal
[edit]The first R-1 to be retired was No. 1132; it was scrapped in January 1929, following a December 1926 boiler explosion in Glenrock, Wyoming.[23] Most of the other R-1's lasted more than fifty-five years in service.[20] The R-1 locomotives' wide route availabilities resulted in more than 190 of them to remain in active service by 1952.[5][20] By the time the C&NW discontinued their commercial steam operations in 1956, more than seventy R-1's had been kept in service, before they were all retired.[20] Some R-1's, such as Nos. 1329 and 175, were painted with white trim stripes for use in pulling occasional excursion fantrips throughout the 1950s, prior to their retirement.[24][18]
Year | Quantity in service at start of year |
Quantity scrapped |
Numbers | Notes |
---|---|---|---|---|
1929 | 325 | 1 | 1132 | |
1936 | 324 | 4 | 476, 1130/61, 1359 | |
1937 | 320 | 6 | 184, 360, 1102/11/31/67 | |
1938 | 314 | 1 | 893 | |
1939 | 313 | 12 | 168, 382, 425/49/83, 1077, 1110/12/16/63, 1229, 1395 | |
1940 | 301 | 26 | 245, 375/80, 417/23/51/71/91, 960, 1120/36/38/45/64/66, 1336/45/47–49/57/69/75/93/99, 1421 |
|
1941 | 275 | 7 | 185, 424, 896, 1219, 1334/64/67 | |
1942 | 268 | 1 | 1392 | |
1943 | 267 | 3 | 1137, 1382, 1420 | |
1944 | 264 | 19 | 418/47/80, 1041/42/74, 1104/14/39/41/43, 1328/35/61/63/65/97, 1411/24 | |
1945 | 245 | 7 | 182, 921, 1126, 1339/51/70, 1416 | |
1946 | 238 | 7 | 290, 452/66, 915, 1106/47, 1405 | |
1947 | 231 | 18 | 44, 61, 122, 295, 343, 484/85, 596, 1070/76/78, 1105/50, 1327/33/55/88/91 | |
1948 | 213 | 1 | 1406 | First half-year only |
Preservation
[edit]Out of the 325 R-1 locomotives that were built, only three have been preserved.[17][26] Two of the R-1's, Nos. 175 and 1385, are currently undergoing restoration to operating condition, whereas one, No. 444, remains on static display.[27]
CNW 175 was built by ALCO in December 1908, being one of the last locomotives of the R-1 class to be built.[23][27][28] It was assigned to pull commuter trains within the Wisconsin Division.[18] In September 1957, No. 175 was used to pull an excursion fantrip before it was retired; it was the final steam-powered train to take place on the C&NW.[18] The locomotive was left in storage in Winona, Minnesota, until December 1960, when it was sold to a private owner.[23][28][18] It was subsequently moved to Hancock, Michigan, where it was left in storage for several decades.[28][18] In 2017, the Steam Railroading Institute (SRI) of Owosso, Michigan acquired No. 175 with the intention of returning the R-1 to active service alongside Pere Marquette 1225.[27][29] The SRI launched a fundraising campaign to rebuild and replace parts of the locomotive, with a large portion of the funding being administered by the Michigan Department of Transportation (MDOT).[29] No. 175 is the only remaining C&NW steam locomotive to be equipped with Walschaerts valve gear.[27][18]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f1/20120521-DSC00388-2_%287257790580%29.jpg/220px-20120521-DSC00388-2_%287257790580%29.jpg)
CNW 444 was built in 1906, and it was converted to burn oil in 1925.[30] It last served the C&NW as a switcher in Belle Fourche, before it was retired in 1956.[30] It was left in storage inside a roundhouse in Chadron, Nebraska, until June 1958, when it was acquired by William B. Heckman, the owner of the Black Hills Central Railroad.[5][23][30] Crews from the C&NW and the Chicago, Burlington and Quincy Railroad (CB&Q) worked to move No. 444 under its own power from Chadron to the Black Hills Central's location in Hill City, South Dakota.[30] In Hill City, South Dakota Governor Joe Foss performed a Golden Spike ceremony, in commemoration of the locomotive's arrival.[30] It was moved to a siding near the end of the Black Hills Central's line for display.[30] In 1968, No. 444 was purchased by the Forney Transportation Museum, and the locomotive was towed to their location in Denver, Colorado, where it is currently being displayed.[5][26] No. 444 is the only remaining oil-burning C&NW steam locomotive.[26]
CNW 1385 was built by ALCO in March 1907, and it was delivered to the C&NW on March 30.[19] It last served the railroad as a switcher in Iron Mountain, Michigan, before it was retired in the summer of 1956.[19] No. 1385 was subsequently used by the C&NW as a stationary boiler to thaw frozen iron ore, until November 1961, when the locomotive was purchased by the original members of the Mid-Continent Railway Museum (MCRM).[19] The locomotive was later restored to operating condition, and it was used to pull the MCRM's tourist trains between North Freedom and Rattlesnake, Wisconsin.[31] In the 1980s, the C&NW leased No. 1385 for use in pulling mainline excursion trains for the railroad's steam excursion program, but the program ended, following a 1986 insurance crisis.[32][33][34] The MCRM subsequently used the R-1 to pull their own mainline excursion trains on other railroads, such as the Wisconsin and Calumet (WICT), and it continued to pull the museum's tourist trains, until 1998, when the condition of its boiler reached a point of no return.[27][33] In 2011, the MCRM initiated a complete rebuild on No. 1385, using grants from the Wagner Foundation.[35] SPEC Machine of Middleton, Wisconsin was hired to perform most of the repairs on the locomotive.[27]
Omaha Road I-1 and K-1 classes
[edit]Between 1901 and 1910, the Chicago, St. Paul, Minneapolis and Omaha Railway (CMO) ordered a fleet of sixty-nine I-1 class 4-6-0 locomotives, and they were identical in design to the C&NW's R-1's.[36][37] When the I-1's were first built, the CMO had to upgrade their rail infrastructure, in order to accommodate the locomotives' larger size and weight.[36][38] The first thirty-five I-1's were initially fitted with clerestory-type roofs on their cabs—a standard practice that was exclusive to all CMO locomotives up to 1905.[36] While the clerestory-type roofs provided better ventilation than a conventional roof, they proved to be more difficult to maintain, so all I-1's had their clerestory-type roofs removed by 1916.[36] The early I-1's were also equipped with tender truck suspensions that were different from those on the R-1's and the later I-1's.[36]
The I-1's built between 1901 and 1905 were also equipped with four-bar crosshead guides, while the I-1's built after 1905 were built with alligator crosshead guides.[36] The I-1 locomotives that were built throughout 1909 and 1910 were equipped with Walchaerts valve gear.[39] At the same time, the American railroad industry perfected superheated boiler designs on steam locomotives, so the CMO ordered a fleet of superheated 4-6-0's that shared basic dimensions with the Walschaerts-powered I-1's, and they were delivered from ALCO between 1911 and 1913, being classified as the K-1's.[39] Twenty-seven K-1's were built, bringing the CMO I-1/K-1 fleet total to ninety-six.[37][39]
Year | Quantity | Manufacturer | Serial numbers | CMO numbers | Notes |
---|---|---|---|---|---|
1901 | 3 | Schenectady | 5834–5836 | 302-304 | I-1's |
1902 | 10 | Alco | 25417–25426 | 308-317 | I-1's |
1903 | 15 | Alco | 27551–27565 | 318–332 | I-1's |
1905 | 3 | Alco | 30468–30470 | 333–335 | I-1's |
1906 | 10 | Alco | 39400–39409 | 336–345 | I-1's |
1907 | 10 | Alco | 42622-42631 | 346–355 | I-1's |
1909 | 5 | Alco | 45915–45919 | 356-360 | I-1's |
1910 | 7 | Alco | 47040–47046 | 361–363, 222-225 | I-1's |
1910 | 6 | Alco | 48948–48953 | 101–106 | I-1's |
1911 | 5 | Alco | 50126–50131 | 107–108, 112, 231-232 | K-1's |
1912 | 12 | Alco | 50947–50956 | 235-246 | K-1's |
1913 | 10 | Alco | 52621–52630 | 110, 125, 183–184, 201, 203–204, 249, 261-262 | K-1's |
Most of the I-1's and K-1's were assigned to way freight and yard-switching services during their working spans.[41] For switching purposes, the locomotives' original wooden pilots were replaced with CMO-designed switcher pilots, beginning in 1933.[41] All CMO I-1's and K-1's were scrapped by the end of the 1950s.
See also
[edit]- Chicago and North Western E-2 Class
- Chicago and North Western E-4 Class
- Norfolk and Western Railway class M
References
[edit]- ^ Jorg (1995), pp. 65–67
- ^ a b c d e Follmar & Jorgensen (1995), p. 47
- ^ a b c d e Follmar & Jorgensen (1995), p. 49
- ^ a b c d e f g h i j Follmar & Jorgensen (1995), p. 51
- ^ a b c d e f g h i "Chicago & North Western No. 1385". Locomotive & Railway Preservation. Pentrex. November–December 1995. pp. 17–18.
- ^ a b c d "LOCOMOTIVES OF THE Chicago & North Western Ry". The Railway and Locomotive Historical Society Bulletin: 1–75. 1938. ISSN 0033-8842. JSTOR 45185718.
- ^ "American Locomotive Company Records". Finding Aids. Syracuse, New York: Special Collections Research Center, Syracuse University Libraries. Retrieved October 28, 2013.
- ^ a b c d Cole 1938, pp. 17–62.
- ^ Follmar & Jorgensen (1995), p. 53
- ^ a b c d e f Follmar & Jorgensen (1995), p. 59
- ^ a b c Follmar & Jorgensen (1995), p. 55
- ^ a b c Jorgensen (1995), p. 47
- ^ Jorgensen (1995), p. 49
- ^ a b Jorgensen (1995), p. 51
- ^ Cole 1938, p. 74.
- ^ Jorgensen (1995), p. 59
- ^ a b c d e f g h Follmar & Jorgensen (1995), p. 45
- ^ a b c d e f g h i Jorgensen (1995), p. 61
- ^ a b c d Glischinski (1993), p. 45
- ^ a b c d Follmar & Jorgensen (1995), p. 63
- ^ a b c d Follmar & Jorgensen (1995), p. 57
- ^ Cole 1938, p. 63.
- ^ a b c d Jorg (1995), pp. 64–65
- ^ Jorgensen (1995), p. 53
- ^ Chicago and North Western Railway 1948, pp. 3–19.
- ^ a b c Follmar & Jorgensen (1995), p. 62
- ^ a b c d e f "Two North Western R-1s are better than one - Classic Trains Magazine - Railroad History, Vintage Train Videos, Steam Locomotives, Forums". 2022-10-25. Archived from the original on 2022-10-25. Retrieved 2023-05-10.
- ^ a b c Follmar & Jorgensen (1995), p. 61
- ^ a b "Steam Railroading Institute launches campaign for C&NW 175 - Trains". 2022-10-06. Archived from the original on 2022-10-06. Retrieved 2023-05-10.
- ^ a b c d e f "Old 444 will make final run to Hill City Friday". Rapid City Journal. 2018-05-11. Retrieved 2023-05-10.
- ^ Glischinski (1993), p. 47
- ^ Glischinski (1993), p. 49
- ^ a b Glischinski (1993), p. 51
- ^ Burger, Chris (Fall 2021). "The little charmer, the Steam Queen, and the big top". Classic Trains. pp. 22–23. Retrieved December 4, 2023.
- ^ Adams, Barry (2021-11-15). "Finish in sight for complete restoration of 1385 locomotive for Mid-Continent Railway Museum". ktvz. Archived from the original on 2023-01-11. Retrieved 2023-11-09.
- ^ a b c d e f Follmar (1995), p. 35
- ^ a b Follmar (1995), p. 37
- ^ Follmar (1995), p. 51
- ^ a b c Follmar (1995), p. 41
- ^ Schmitz, Lou (Fall 1995). "Omaha Class I-1 and K-1 4-6-0 Roster". North Western Lines. p. 37.
- ^ a b Follmar (1995), p. 57
Further reading
[edit]![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- Cole, F.A. (1938). Locomotives of the Chicago & North Western Railway. Boston: The Railway & Locomotive Historical Society.
- Chicago and North Western Railway (1948). Locomotives of the Chicago & North Western Railway, supplement. The Railway & Locomotive Historical Society.
- Drury, George H. (1985). The Historical Guide to North American Railroads. Milwaukee, Wisconsin: Kalmbach Publishing Company. ISBN 0-89024-072-8. LCCN 85080107.
- Follmar, Joseph; Jorgensen, Raymond (Winter 1995). "Locomotives That Changed the C&NW: The Class R-1 Ten-Wheelers". North Western Lines. pp. 45–63.
- Jorg, Ray (Winter 1995). "C&NW R-1 Disposition List". North Western Lines. pp. 64–67.
- Jorgensen, Raymond (Spring 1995). "The C&NW "Walschaert" R-1's". North Western Lines. pp. 47–65.
- Glischinski, Steve (December 1993). "The life and times of a Ten-Wheeler". Trains. pp. 45–51.
- Follmar, Joe (Fall 1995). "Twins of the C&NW Class R-1's: Omaha Road's Class I-1 4-6-0's". North Western Lines. pp. 35–57.