Jump to content

File:BWR Mark I Containment sketch with downcomers.png

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Original file (826 × 852 pixels, file size: 61 KB, MIME type: image/png)

Summary

Description
English: Rough sketch of a typical Boiling water reactor (BWR) Mark I Concrete Containment with Steel Torus including downcomers, as used in the BWR/1, BWR/2, BWR/3 and some BWR/4 model reactors.
  • DW = Drywell
  • WW = Wetwell
  • SFP = Spent Fuel Pool
  • RPV = Reactor Pressure Vessel
  • SCSW = Secondary Concrete Shield Wall
Français : Diagramme/coupe d'un réacteur à eau bouillante (REB) typique de type Mark I à enceinte de confinement en béton avec tore d'acier sous-jacent, tel qu'utilisé dans les réacteurs de type REB/1, REB/2, REB/3 et certains REB/4.
Español: Diagrama/corte esquemático de un reactor de agua en ebullición tipico del tipo Mark I con recinto de contención en hormigón con toro subyacente en acero, como los utilizados en los reactores de tipo BWR/1, BWR/2, BWR/3 y algunos BWR/4.
Català: Esquema d'un reactor d'aigua en ebullició (BWR, Boiling water reactor) de tipus Mark I amb contenció de formigó i torus d'acer incloent baixants, com els utilitzats en els models de reactor BWR/1, BWR/2, BWR/3 i alguns BWR/4.
  • DW = Pou sec
  • WW = Pou moll
  • SFP = Piscina del combustible gastat
  • RPV = Vas a pressió del reactor
  • SCSW = Paret secundària amb blindatge de formigó
Date
Source Sketched in Paint.net using 826 x 852 canvas inspired by Page 15 (pdf: 40), Containment Integrity Research at Sandia National Laboratories - An Overview, Manuscript completed: March 2006, Published: July 2006, id: NUREG/CR-6906 and SAND2006-2274P [1] - Prepared by Sandia National Laboratories for the U.S. Nuclear Regulatory Commission, Job Code Y6757. The two diagrams on the same page are labeled: Figure 5 Typical BWR Mark I Concrete Containment with Steel Torus.
Author User:84user
Other versions

Licensing

Public domain This work has been released into the public domain by its author, 84user. This applies worldwide.
In some countries this may not be legally possible; if so:
84user grants anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

16 March 2011

image/png

17af4a0870fc15b586fd78ae9098da03d651375b

62,296 byte

852 pixel

826 pixel

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current23:16, 18 March 2011Thumbnail for version as of 23:16, 18 March 2011826 × 852 (61 KB)TripallokavipasekAdded tags to RPV (Reactor Pressure Vessel) and SCSW (Secondary Concrete Shield Wall) and added a "P" for Pool to tag SFP. Added color to SFP and steam to the DW.
23:33, 15 March 2011Thumbnail for version as of 23:33, 15 March 2011826 × 852 (35 KB)84useradd SF for spent fuel pool area, and compressed with PNGOUT this time
23:10, 15 March 2011Thumbnail for version as of 23:10, 15 March 2011826 × 852 (33 KB)84user== {{int:filedesc}} == {{Information |Description = {{en|1=Rough sketch of a typical Boiling water reactor (BWR) Mark I Concrete Containment with Steel Torus including downcomers, as used in the BWR/1, BWR/2, BWR/3 and some BWR/4 model reactors. *DW =

The following page uses this file:

Global file usage

The following other wikis use this file: