Jump to content

Cephalometric analysis

From Wikipedia, the free encyclopedia
(Redirected from Osteometric points)

Cephalometric analysis is the clinical application of cephalometry. It is analysis of the dental and skeletal relationships of a human skull.[1] It is frequently used by dentists, orthodontists, and oral and maxillofacial surgeons as a treatment planning tool.[2] Two of the more popular methods of analysis used in orthodontology are the Steiner analysis (named after Cecil C. Steiner) and the Downs analysis (named after William B. Downs).[3] There are other methods as well which are listed below.[4]

Cephalometric radiographs

[edit]

Cephalometric analysis depends on cephalometric radiography to study relationships between bony and soft tissue landmarks and can be used to diagnose facial growth abnormalities prior to treatment, in the middle of treatment to evaluate progress, or at the conclusion of treatment to ascertain that the goals of treatment have been met.[5] A Cephalometric radiograph is a radiograph of the head taken in a Cephalometer (Cephalostat) that is a head-holding device introduced in 1931 by Holly Broadbent Sr. in USA.[6] The Cephalometer is used to obtain standardized and comparable craniofacial images on radiographic films.

Machine and Dimensions

[edit]

To carry out cephalometry, the X-ray source is placed a steady five feet away from the mid sagittal plane, with film situated just 15 cm from there. This allows for accurate measurements to be taken and recorded.[7] Distance has a direct impact on cephalometric image magnification. With an object-to-film interval of 15 cm and a source-to-object span of 5 feet, magnification of anatomical landmarks will be reduced in all three dimensions.When attempting to analyze a patient's anatomy through lateral and frontal cephalograms, the challenge arises due to these images being two-dimensional projections of three-dimensional structures. Magnification and distortion as an outcome of traditional radiography further complicates the process by blurring important details.[8]

Lateral cephalometric radiographs

[edit]
Lateral cephalometric radiograph, used for skull analysis

Lateral cephalometric radiograph is a radiograph of the head taken with the x-ray beam perpendicular to the patient's sagittal plane. Natural head position is a standardized orientation of the head that is reproducible for each individual and is used as a means of standardization during analysis of dentofacial morphology both for photos and radiographs. The concept of natural head position was introduced by Coenraad Moorrees and M. R Kean in 1958[9][10] and now is a common method of head orientation for cephalometric radiography.[11][12]

Registration of the head in its natural position while obtaining a cephalogram has the advantage that an extracranial line (the true vertical or a line perpendicular to that) can be used as a reference line for cephalometric analysis, thus bypassing the difficulties imposed by the biologic variation of intracranial reference lines. True vertical is an external reference line, commonly provided by the image of a free-hanging metal chain on the cephalostat registering on the film or digital cassette during exposure. The true vertical line offers the advantage of no variation (since it is generated by gravity) and is used with radiographs obtained in natural head position.

Posteroanterior (P-A) cephalometric radiograph

[edit]

A radiograph of the head taken with the x-ray beam perpendicular to the patient's coronal plane with the x-ray source behind the head and the film cassette in front of the patient's face.[13] PA ceph can be evaluated by following analyses that have been developed through the years:

  • Grummon analysis
  • MSR
  • Hewitt analysis
  • Svanholt-Solow analysis
  • Grayson analysis

Cephalometric tracing

[edit]

A cephalometric tracing is an overlay drawing produced from a cephalometric radiograph by digital means and a computer program or by copying specific outlines from it with a lead pencil onto acetate paper, using an illuminated view-box. Tracings are used to facilitate cephalometric analysis, as well as in superimpositions, to evaluate treatment and growth changes. Historically, tracings of the cephalometric radiographs are done on an 0.003 inch thick matte acetate paper by using a #3 pencil. The process is started by marking three registration crosses on the radiograph which are then transferred to the acetate paper.

Anatomical structures are traced first and some structures are bilateral and have tendency to show up as two separate lines, should have an "average" line drawn which is represented as a broken line. These landmarks could include inferior border of mandible.

Cephalometric landmarks

[edit]

The following are important cephalometric landmarks, which are points of reference serving as datum references in measurement and analysis. (Sources: Proffit;[14] others.)

Landmark points can be joined by lines to form axes, vectors, angles, and planes (a line between 2 points can define a plane by projection). For example, the sella (S) and the nasion (N) are points that together form the sella-nasion line (SN or S-N), which can be projected into the SN plane. A prime symbol (′) usually indicates the point on the skin's surface that corresponds to a given bony landmark (for example, nasion (N) versus skin nasion (N′).

Landmark name Landmark symbol Comments
A point (subspinale) A Most concave point of anterior maxilla
A point–nasion–B point angle ANB Average of 2° ± 2°
B point (supramentale) B Most concave point on mandibular symphysis
basion Ba Most anterior point on foramen magnum
anterior nasal spine ANS Anterior point on maxillary bone
articulare Ar Junction between inferior surface of the cranial base and the posterior border of the ascending rami of the mandible
Bolton point Point at the intersection of the occipital condyle and Foramen Magnum at the highest notch posterior to the occipital condyle
cheilion Ch Corner of oral cavity
chresta philtri Chp Head of nasal filter
condylion Most posterior/superior point on the condyle of mandible
dacryon dac Point of junction of maxillary bone, lacrimal bone, and frontal bone
endocanthion En Point at which inner ends of upper and lower eyelids meet (medial canthal point)
exocanthion (synonym, ectocanthion) Ex Point at which outer ends of upper and lower eyelids meet (lateral canthal point)
frontotemporal Ft Most medial point on the temporal crest
glabella G' Most prominent point in the median sagittal plane between the supraorbital ridges
gnathion Gn Point located perpendicular on mandibular symphysis midway between pogonion and menton
gonion Go Most posterior inferior point on angle of mandible. Can also be constructed by bisecting the angle formed by intersection of mandibular plane and ramus of mandible
key ridges Posterior vertical portion and inferior curvature of left and right zygomatic bones
labial inferior Li Point denoting vermilion border of lower lip in midsagittal plane
labialis superior Ls Point denoting vermilion border of upper lip
lower incisor L1 Line connecting incisal edge and root apex of the most prominent mandibular incisor
menton Me Lowest point on mandibular symphysis
  soft tissue menton Me′ Lowest point on soft tissue over mandible
nasion N Most anterior point on frontonasal suture
  soft tissue nasion N′ Point on soft tissue over nasion
odontale Highest point on second vertebra
orbitale Or Most inferior point on margin of orbit
opisthion Op Most posterior point of foramen magnum
pogonion Pg Most anterior point of mandibular symphysis
  soft tissue pogonion Pg′ Soft tissue over pogonion
porion Po Most superior point of outline of external auditory meatus
  machine porion Superior-most point of the image of the ear rod
posterior nasal spine PNS Posterior limit of bony palate or maxilla
pronasale (synonyms, pronasal or pronasion) Prn Soft tissue point on tip of nose
prosthion (supradentale, superior prosthion) Pr The most inferior anterior point on the maxillary alveolar process between the central incisors
PT point PT Point at junction between Ptm and foramen rotundum (at 11 o'clock from Ptm)
pterygomaxillary fissure Ptm Point at base of fissure where anterior and posterior wall meet. Anterior wall represents posterior surface of maxillary tuberosity
registration point A reference point for superimposition of ceph tracings
sella (that is, sella turcica) S Midpoint of sella turcica
sphenoethmoidal suture SE the cranial suture between the sphenoid bone and the ethmoid bone
sella–nasion line SN or S–N Line from sella to nasion
sella–nasion–A point angle SNA or S-N-A Average of 82 degrees with +/- of 2 degrees
sella–nasion–B point angle SNB or S-N-B Average of 80 degrees with +/- of 2 degrees
sublabialis Sl
subnasale (synonyms, subnasal or subnasion) Sn In the midline, the junction where base of the columella of the nose meets the upper lip
stomion inferius Sti Highest midline point of lower lip
stomion superius Sts Highest midline point of upper lip
throat point Junction of inferior border of mandible and throat
tragion T′ Notch above the tragus of the ear where the upper edge of the cartilage disappears into the skin of the face
trichion Tr Midline of hairline
upper incisor U1 A line connecting the incisal edge and root apex of the most prominent maxillary incisor
xi point Xi An approximate point for inferior alveolar foramen

Below is a list of cephalometric planes that are commonly used in different cephalometric analyses.

Cephalometric plane Plane symbol Definition
palatal plane ANS-PNS This plane is formed by connecting ANS to PNS and is used to measure the vertical tilt of maxilla
SN plane SN plane This plane represents the anterior cranial base and is formed by projecting a plane from the sella-nasion line
Frankfort horizontal plane (Frankfurt horizontal plane) P-Or This plane represents the habitual postural position of the head.
condylar plane Co-Or This plane can be used as an alternate to Frankfort horizontal plane.
functional occlusal plane FOP This plane passes is formed by drawing a line that touches the posterior premolars and molars.
Downs occlusal plane DOP This plane is formed by bisecting the anterior incisors and the distal cusps of the most posterior in occlusion.
mandibular plane Go-Gn This plane is formed by connecting the point gonion to gnathion at the inferior border of the mandible.
facial plane N-Pg This vertical plane is formed by connecting nasion to pogonion as described in the Schudy analysis.
Bolton plane This plane is formed by connecting the Bolton point to nasion. This plane includes the registration point and is part of the Bolton triangle.

Classification of analyses

[edit]

The basic elements of analysis are angles and distances. Measurements (in degrees or millimetres) may be treated as absolute or relative, or they may be related to each other to express proportional correlations. The various analyses may be grouped into the following:

  1. Angular – dealing with angles
  2. Linear – dealing with distances and lengths
  3. Coordinate – involving the Cartesian (X, Y) or even 3-D planes
  4. Arcial – involving the construction of arcs to perform relational analyses

These in turn may be grouped according to the following concepts on which normal values have been based:

  1. Mononormative analyses: averages serve as the norms for these and may be arithmetical (average figures) or geometrical (average tracings), e.g. Bolton Standards
  2. Multinormative: for these a whole series of norms are used, with age and sex taken into account, e.g. Bolton Standards
  3. Correlative: used to assess individual variations of facial structure to establish their mutual relationships, e.g. the Sassouni arcial analysis

Cephalometric angles

[edit]

According to the Steiner analysis:

  • ANB (A point, nasion, B point) indicates whether the skeletal relationship between the maxilla and mandible is a normal skeletal class I (+2 degrees), a skeletal Class II (+4 degrees or more), or skeletal class III (0 or negative) relationship.
  • SNA (sella, nasion, A point) indicates whether or not the maxilla is normal, prognathic, or retrognathic.
  • SNB (sella, nasion, B point) indicates whether or not the mandible is normal, prognathic, or retrognathic.

SNA and SNB is important to determine what type of intervention (on maxilla, mandible or both) is appropriate. These angles, however are influenced also by the vertical height of the face and a possible abnormal positioning of nasion.[14] By using a comparative set of angles and distances, measurements can be related to one another and to normative values to determine variations in a patient's facial structure.[15]

Analyses (analytic approaches) by various authors

[edit]

Steiner analysis

[edit]

Cecil C. Steiner developed Steiner Analysis in 1953. He used S–N plane as his reference line in comparison to FH plane due to difficulty in identifying the orbitale and porion. Some of the drawbacks of the Steiner analysis includes its reliability on the point nasion. Nasion as a point is known not to be stable due to its growth early in life. Therefore, a posteriorly positioned nasion will increase ANB and more anterior positioned nasion can decrease ANB. In addition, short S–N plane or steeper S–N plane can also lead to greater numbers of SNA, SNB and ANB which may not reflect the true position of the jaws compare to the cranial base. In addition, clockwise rotation of both jaws can increase ANB and counter-clockwise rotation of jaws can decrease ANB.

Name Description Normal Standard Deviation
Skeletal
SNA (°) Sella-Nasion to A Point Angle 82 degrees +/- 2
SNB (°) Sella-Nasion to B Point Angle 80 degrees +/- 2
ANB (°) A point to B Point Angle 2 degrees +/- 2
Occlusal Plane to SN (°) SN to Occlusal Plane Angle 14 degrees
Mandibular Plane (°) SN to Mandibular Plane Angle 32 degrees
Dental
U1-NA (degree) Angle between upper incisor to NA line 22 degrees
U1-NA (mm) Distance from upper incisor to NA line 4 mm
L1-NB (degree) Angle between lower incisor to NB line 25 degrees
L1-NB (mm) Distance from lower incisor to NB line 4 mm
U1-L1 (°) Upper incisor to lower incisor angle 130 degrees
L1-Chin (mm) Also known as Holdaway Ratio. It states that chin prominence should be as far away as the farthest point of the lower incisor should be. An ideal distance is 2mm from Pogonion to NB line and L1 to NB line. 4mm
Soft tissue
S Line Line formed by connecting Soft Tissue Pogonion and middle of an S formed by lower border of the nose Ideally, both lips should touch the S line

Wits analysis

[edit]

The name Wits is short for Witwatersrand, which is a University in South Africa. Jacobsen in 1975 published an article called "The Wits appraisal of jaw disharmony".[16] This analysis was created as a diagnostic aid to measure the disharmony between the AP degree. The ANB angle can be affected by multitude of environmental factors such as:

  1. Patient's age where ANB has tendency to reduce with age
  2. Change in position of nasion as pubertal growth takes place
  3. Rotational effect of jaws
  4. Degree of facial Prognathism

Therefore, it measured the AP positions of the jaw to each other. This analysis calls for 1. Drawing an Occlusal Plane through the overlapping cusps of Molars and Premolars. 2. Draw perpendicular lines connecting A point and B Point to the Occlusal Plane 3. Label the points as AO and BO.[17]

In his study, Jacobsen mentioned that average jaw relationship is -1mm in Males (AO is behind BO by 1mm) and 0mm in Females (AO and BO coincide). Its clinical significance is that in a Class 2 skeletal patient, AO is located ahead of BO. In skeletal Class 3 patient, BO is located ahead of AO. Therefore, the greater the wits reading, the greater the jaw discrepancy.

Drawbacks to Wits analysis includes:[18]

  • Left and Right molar outlines may not always coincide
  • Occlusal plane may differ in mixed vs permanent dentition
  • If curve of spee is deep then it may be difficult to create a straight occlusal plane
  • Angulation of functional occlusal plane to pterygomaxillary vertical plane was shown to decrease from age 4 to 24.

Delaire Analysis

[edit]

Prof. Jean Delaire started developing his analysis along with Dr M. Salagnac back in the 70's. [citation needed] This analysis is still developed and improved by his pupils. This analysis is based on reciprocal proportion and balance and doesn't use standard deviation. It gives the ideal architecture the patient should have, based on his skull shape, posture and functions.[19]

Downs analysis

[edit]
Name Description Normal Standard Deviation
Skeletal
Facial Angle (°) Angle between Nasion-Pogonion and Frankfurt Horizontal Line 87.8 +/- 3.6
Angle of Convexity (°) Angle between Nasion – A point and A point – Pogonion Line 0 +/- 5.1
Mandibular Plane Angle (°) Angle between Frankfort horizontal line and the line intersecting Gonion-Menton 21.9 +/- 5
Y Axis (°) Sella Gnathion to Frankfurt Horizontal Plane 59.4 +/- 3.8
A-B Plane Angle (°) Point A-Point B to Nasion-Pogonion Angle −4.6 +/- 4.6
Dental
Cant of Occlusal Plane (°) Angle of cant of occlusal plane in relation to FH Plane 9.3 +/- 3.8
Inter-Incisal Angle (°) 135.4 +/- 5.8
Incisor Occlusal Plane Angle (°) Angle between line through long axis of Lower Incisor and occlusal Plane 14.5 +/- 3.5
Incisor Mandibular Plane Angle (°) Angle between line through long axis of Lower incisor and Mandibular Plane 1.4 +/- 3.8
U1 to A-Pog Line (mm) 2.7 +/- 1.8

Bjork analysis

[edit]

This analysis by Arne Bjork was developed in 1947 based on 322 Swedish boys and 281 conscripts. He introduced a facial polygon which was based on 5 angles and is listed below. Bjork also developed the 7 structural signs which indicates the mandibular rotator type.[20]

  • Nasion Angle - Formed by line connecting ANS to Nasion to Sella
  • Saddle or Cranial Base Angle - Formed by line connecting Nasion to Sella to Articulare
  • Articular Angle - Formed by line connecting Sella to Articulare to Gonion
  • Gonial Angle – Formed by line connecting Articulare to Gonion to Gnathion
  • Chin Angle – Formed by line connecting Infradentale to Pogonion to the Mandibular Plane.

Tweed analysis (triangle)

[edit]

Charles H. Tweed developed his analysis in the year 1966.[21] In this analysis, he tried describing the lower incisor position in relation to the basal bone and the face. This is described by 3 planes. He used Frankfurt Horizontal plane as a reference line.[22][23]

Name Description Normal
Tweed facial triangle
IMPA (°) Angle between long axis of lower incisor and mandibular plane angle 90 (°) +/- 5
FMIA (°) Frankfort mandibular incisor angle 65 (°)
FMA (°) Frankfort mandibular plane angle 25 (°)
Total 180 (°)

Jarabak analysis

[edit]

Analysis developed by Joseph Jarabak in 1972.[24] The analysis interprets how the craniofacial growth may affect the pre and post treatment dentition. The analysis is based on 5 points: Nasion (Na), Sella (S), Menton (Me), Go (Gonion) and Articulare (Ar). They together make a Polygon on a face when connected with lines. These points are used to study the anterior/posterior facial height relationships and predict the growth pattern in the lower half of the face. Three important angles used in his analysis are: 1. Saddle Angle - Na, S, Ar 2. Articular Angle - S-Ar-Go, 3. Gonial Angle - Ar-Go-Me.

In a patient who has a clockwise growth pattern, the sum of 3 angles will be higher than 396 degrees. The ratio of posterior height (S-Go) to Anterior Height (N-Me) is 56% to 44%. Therefore, a tendency to open bite will occur and a downward, backward growth of mandible will be observed.[25]

Ricketts analysis

[edit]
Landmark Name Landmark Symbol Description
Upper Molar A6 Point on the occlusal plane located perpendicular to the distal surface of the crown of the upper first molar
Lower Molar B6 Point on the occlusal plane located perpendicular to the distal surface of the crown of the lower first molar
Condyle CI A point on the condyle head in contact with and tangent to the ramus plane
Soft Tissue DT Point on the anterior curve of the soft tissue chin tangent to the esthetic plane or E line
Center of Cranium CC Point of intersection of the basion-nasion plane and the facial axis
Points from Plane at Pterygoid CF The point of intersection of the pterygoid root vertical to the Frankfort horizontal plane
PT Point PT Junction of Pterygomaxillary fissure and the foramen rotundum.
Condyle DC Point in the center of the condyle neck along the Ba–N plane
Nose En Point on the soft tissue nose tangent to the esthetic plane
Gnathion Gn Point of intersection between the line between pogonion and menton
Gonion Go Point of intersection between ramus plane and mandibular plane
Suprapogonion PM Point at which shape of symphysis mentalis changes from convex to concave
Pogonion Pog Most anterior point of the mandibular symphysis
Cephalometric PO Intersection of facial plane and corpus axis
T1 Point TI Point of intersection of the occlusal and facial planes
Xi Point Xi
Name of Planes Symbol
Frankfort Horizontal FH Plane This plane extends from porion to orbitale
Facial Plane This plane extends from nasion to pogonion
Mandibular Plane Plane extending from gonion to gnathion
PtV (Pterygoid vertical) This line is drawn through PTM and is perpendicular to the FH plane
Basion-Nasion Plane Plane extending from basion to nasion
Occlusal Plane Occlusal plane through molars and premolars contact (functional plane)
A-Pog Line A line extending from Point A to pogonion
E-Line This line extends from the tip of soft tissue nose to soft tissue Pogonion

The Rickett analysis also consists of following measurements

Name Description Normal Standard Deviation
Facial Axis Angle between Pt/Gn and the line N/Ba 90 +/- 3.5
Facial Angle Angle between the line FL and FH 89 +/- 3
ML/FH Angle between the line FH and the line ML 24 +/- 4.5
Convexity Distance between Pog/N and A 0 +/- 2
Li-A-Pog Distance between Pog/A and Li 1 +/- 2
Ms-PtV Projection on the line FH of the distance between the markers PT/Ms-d 18
ILi-/A-Pog Distance between the line Pog/A and the line Lia/Li 22 +/- 4
Li-EL Distance between the line EL and Li −2 +/- 2

Sassouni analysis

[edit]

This analysis, developed by Viken Sassouni in 1955,[26][27] states that in a well proportioned face, the following four planes meet at the point O. The point O is located in the posterior cranial base. This method categorized the vertical and the horizontal relationship and the interaction between the vertical proportions of the face. The planes he created are:

  1. Supraorbital plane (anterior clinoid to roof of orbits)
  2. Palatal plane (ANS-PNS)
  3. Occlusal plane (Downs occlusal plane)
  4. Mandibular plane (Go-Me)

The more parallel the planes, the greater the tendency for deep bite and the more non-parallel they are the greater the tendency for open bite. Using the O as the centre, Sassouni created the following arcs

  • Anterior Arc – Arc of a circle between the anterior cranial base and the mandibular plane, with O as the center and O-ANS as the radius.
  • Posterior Arc – Arc of a circle between anterior cranial base and mandibular base with O as centre and OSp as radius.
  • Basal Arc – From A point should pass through B point
  • Midfacial Arc – From Te and should pass tangent to the mesial surface of the maxillary first molar

Harvold analysis

[edit]

This analysis was developed by Egil Peter Harvold in 1974.[28] This analysis developed standards for the unit length of the maxilla and mandible. The difference between the unit length describes the disharmony between the jaws. It is important to know that location of teeth is not taken into account in this analysis.

The maxillary unit length is measured from posterior border of mandibular condyle (Co) to ANS. The mandibular unit length is measured from posterior border of mandibular condyle (Co) to Pogonion. This analysis also looks at the lower facial height which is from upper ANS to Menton.[29]

McNamara analysis

[edit]
Landmark Name Landmark Symbol Description Normal
Maxilla to Cranial Base
Nasolabial Angle 14 degrees
Na Perpendicular to Point A 0-1mm
Maxilla to Mandible
AP
Mandibular Length (Co-Gn)
Mandible to Cranial Base
Pog-Na Perpendicular Small = -8 to −6mm

Medium = -4mm to 0mm

Large = -2mm to +2mm

Dentition
1 to A-Po 1-3mm
1 to Point A 4-6mm
Airway
Upper Pharynx 15-20mm
Lower Pharynx 11-14mm

COGS analysis (cephalometrics for orthognathic surgery)

[edit]

This analysis was developed by Charles J. Burstone when it was presented in 1978 in an issue of AJODO.[30] This was followed by Soft Tissue Cephalometric Analysis for Orthognathic Surgery in 1980 by Arnette et al.[31] In this analysis, Burstone et al. used a plane called horizontal plane, which was a constructed of Frankfurt Horizontal Plane.

Landmark Name Landmark Symbol Description Normal
Cranial Base
Posterior Cranial Base AR-PTM
Anterior Cranial BAse PTM-N
Vertical Skeletal and Dental
Upper Anterior Facial Height N-ANS
Lower Anterior Facial Height ANS-GN
Upper Posterior Facial Height PNS-N
Mandibular Plane Angle MP-HP
Upper Anterior Dental Height U1-NF
Lower Anterior Dental Height L1-MP
Upper Posterior Dental Height UM-NF
Lower Posterior Dental Height LM-MP
Maxilla and Mandible
Maxillary Length PNS-ANS
Mandibular Ramus Length
Mandibular Body Length
Chin Depth B-PG
Gonial Angle AR-GO-GN
Dental Relationships
Occlusal Plane OP-HP
Upper incisors inclination U1-NF
Lower incisors inclination L1/GO-ME
Wits Analysis A-B/OP

Computerised cephalometrics

[edit]

Computerised cephalometrics is the process of entering cephalometric data in digital format into a computer for cephalometric analysis. Digitization (of radiographs) is the conversion of landmarks on a radiograph or tracing to numerical values on a two- (or three-) dimensional coordinate system, usually for the purpose of computerized cephalometric analysis. The process allows for automatic measurement of landmark relationships. Depending on the software and hardware available, the incorporation of data can be performed by digitizing points on a tracing, by scanning a tracing or a conventional radiograph, or by originally obtaining computerized radiographic images that are already in digital format, instead of conventional radiographs. Computerized cephalometrics offers the advantages of instant analysis; readily available race-, sex- and age-related norms for comparison; as well as ease of soft tissue change and surgical predictions. Computerized cephalometrics has also helped in eliminating any surgeon inadequacies as well as making the process less time-consuming.

The first medically certified automated cephalometric analysis of 2D lateral cephalometric radiographs by Artificial intelligence was brought to market in November 2019.[32]

Digitization

[edit]

Computer processing of cephalometric radiographs uses a digitizer. Digitization refers to the process of expressing analog information in a digital form. A digitizer is a computer input device which converts analog information into an electronic equivalent in the computer's memory. In this treatise and its application to computerized cephalometrics, digitization refers to the resolving of headfilm landmarks into two numeric or digital entities – the X and Y coordinate. 3D analysis would have third quantity – Z coordinate.

Superimposition

[edit]

Cephalometric radiographs can be superimposed on each other to see the amount of growth that has taken place in an individual or to visualize the amount of movement of teeth that has happened in the orthodontic treatment. It is important to superimpose the radiograph on a stable anatomical structures. Traditionally, this process has been done by tracing and superimposing on cranial landmarks. One of the most common used methods of superimposing is called the Structural Method.

Structural method

[edit]

According to American Board of Orthodontics, this method is based on series of study performed by Arne Bjork,[33][34] Birte Melsen[35] and Donald Enlow.[36] This method divides superimposition in three categories: Cranial base superimposition, maxillary superimposition and mandibular superimposition. Some of the important landmarks in each category is listed below as per the structural method.

Cranial base superimposition

[edit]

Mandibular superimposition

[edit]
  • The anterior contour of the chin
  • The inner cortical structure at the inferior border of the mandibular symphysis.
  • Trabecular structures in the mandibular symphysis.
  • Trabecular structures related to the mandibular canal.
  • The lower contour of a molar germ

Maxillary superimposition

[edit]

See also

[edit]

References

[edit]
  1. ^ "cephalometric analysis". Oxford Reference. 1999-02-22.
  2. ^ Tenti, F. V. (1981-01-01). "Cephalometric analysis as a tool for treatment planning and evaluation". The European Journal of Orthodontics. 3 (4). Oxford University Press (OUP): 241–245. doi:10.1093/ejo/3.4.241. ISSN 0141-5387. PMID 6945994.
  3. ^ Oria, A; Schellino, E; Massaglia, M; Fornengo, B (June 1991). "[A comparative evaluation of Steiner's and McNamara's methods for determining the position of the bone bases]". Minerva Stomatol. 40 (6): 381–5. PMID 1944052.
  4. ^ "Evaluating Ricketts' Cephalometric Analysis as Diagnostic Aid in Black Females". iadr.confex.com. 2008-10-26. Archived from the original on 2008-10-26.
  5. ^ Predoctoral Orthodontic Laboratory Manual 2008, Department of Undergraduate Orthodontics, New Jersey Dental School
  6. ^ US Patent 2032833, Birdsall H. Broadbent 
  7. ^ Juvvadi, ShubhakerRao; Gandikota, ChandraSekhar; Rayapudi, Naveen; Challa, PadmaLatha; Yudhister, PV; Rao, GuttiHariprasad (2012). "A comparative study of linear measurements on facial skeleton with frontal and lateral cephalogram". Contemporary Clinical Dentistry. 3 (2). Medknow: 176–179. doi:10.4103/0976-237x.96823. ISSN 0976-237X. PMC 3425101. PMID 22919218.
  8. ^ Grayson, Barry; Cutting, Court; Bookstein, Fred L.; Kim, Hiechun; McCarthy, Joseph G. (1988). "The three-dimensional cephalogram: Theory, techniques, and clinical application". American Journal of Orthodontics and Dentofacial Orthopedics. 94 (4). Elsevier BV: 327–337. doi:10.1016/0889-5406(88)90058-3. hdl:2027.42/27121. ISSN 0889-5406. PMID 3177285.
  9. ^ Moorrees, Coenraad F. A.; Kean, Martin R. (1958-06-01). "Natural head position, a basic consideration in the interpretation of cephalometric radiographs". American Journal of Physical Anthropology. 16 (2): 213–234. doi:10.1002/ajpa.1330160206. ISSN 1096-8644.
  10. ^ Moorrees, Coenraad F.A. (1994-05-01). "Natural head position—a revival". American Journal of Orthodontics and Dentofacial Orthopedics. 105 (5): 512–3. doi:10.1016/S0889-5406(94)70014-1. ISSN 0889-5406. PMID 8166103.
  11. ^ Weber, Diana W.; Fallis, Drew W.; Packer, Mark D. (2013-05-01). "Three-dimensional reproducibility of natural head position". American Journal of Orthodontics and Dentofacial Orthopedics. 143 (5): 738–744. doi:10.1016/j.ajodo.2012.11.026. ISSN 0889-5406. PMID 23631976.
  12. ^ Bansal, Naveen; Singla, Jeetinder; Gera, Gurmeet; Gupta, Monika; Kaur, Gurpreet (2012). "Reliability of natural head position in orthodontic diagnosis: A cephalometric study". Contemporary Clinical Dentistry. 3 (2): 180–183. doi:10.4103/0976-237X.96824. ISSN 0976-237X. PMC 3425102. PMID 22919219.
  13. ^ Bergman, R. (March 1988). "Practical applications of the PA cephalometric headfilm". Orthodontic Review. 2 (2): 20–26. ISSN 0895-5034. PMID 3269997.
  14. ^ a b Proffit, W.R. (1993). Contemporary Orthodontics (3rd ed.). Mosby-Year Book. ISBN 978-0-8016-6393-2.
  15. ^ "AI Services: Automatic Cephalometric Analysis". cephX. 2023-10-20.
  16. ^ Jacobson, A. (1975-02-01). "The "Wits" appraisal of jaw disharmony". American Journal of Orthodontics. 67 (2): 125–138. doi:10.1016/0002-9416(75)90065-2. ISSN 0002-9416. PMID 1054214.
  17. ^ Jacobson, Alex (2009-07-15). "Update on the Wits Appraisal". The Angle Orthodontist. 58 (3): 205–19. PMID 3056122.
  18. ^ Zawawi, Khalid H. (2012-01-01). "Comparison of Wits appraisal among different ethnic groups". Journal of Orthodontic Science. 1 (4): 88–91. doi:10.4103/2278-0203.105874. ISSN 2278-1897. PMC 4072364. PMID 24987633.
  19. ^ Doberschütz, Philine Henriette; Schwahn, Christian; Krey, Karl-Friedrich (2021-05-29). "Cephalometric analyses for cleft patients: a statistical approach to compare the variables of Delaire's craniofacial analysis to Bergen analysis". Clinical Oral Investigations. 26 (1): 353–364. doi:10.1007/s00784-021-04006-3. PMC 8791903. PMID 34050425. S2CID 235242385.
  20. ^ Björk, A. (September 1966). "Sutural growth of the upper face studied by the implant method". Acta Odontologica Scandinavica. 24 (2): 109–127. doi:10.3109/00016356609026122. ISSN 0001-6357. PMID 5225742.
  21. ^ Greenstein, A. V (1943-09-01). "The tweed philosophy". American Journal of Orthodontics and Oral Surgery. 29 (9): 527–540. doi:10.1016/S0096-6347(43)90310-2.
  22. ^ Cross, J. J. (December 1996). "The Tweed philosophy: the Tweed years". Seminars in Orthodontics. 2 (4): 231–236. doi:10.1016/s1073-8746(96)80022-3. ISSN 1073-8746. PMID 9161293.
  23. ^ Vaden, J. L. (December 1996). "The Tweed-Merrifield philosophy". Seminars in Orthodontics. 2 (4): 237–240. doi:10.1016/s1073-8746(96)80023-5. ISSN 1073-8746. PMID 9161294.
  24. ^ Jarabak, Joseph R.; Fizzell, James A. (1972). Technique and treatment with light-wire edgewise appliances. C. V. Mosby Co. ISBN 9780801624292.
  25. ^ Rodriguez-Cardenas, Yalil Augusto; Arriola-Guillen, Luis Ernesto; Flores-Mir, Carlos (2014). "Björk-Jarabak cephalometric analysis on CBCT synthesized cephalograms with different dentofacial sagittal skeletal patterns". Dental Press Journal of Orthodontics. 19 (6): 46–53. doi:10.1590/2176-9451.19.6.046-053.oar. ISSN 2176-9451. PMC 4347410. PMID 25628079.
  26. ^ Sassouni, Viken (1955-10-01). "A roentgenographic cephalometric analysis of cephalo-facio-dental relationships". American Journal of Orthodontics. 41 (10): 735–764. doi:10.1016/0002-9416(55)90171-8. ISSN 0002-9416.
  27. ^ Phillips, J. G. (August 1978). "Photo-cephalometric analysis in treatment planning for surgical correction of facial disharmonies". Journal of Maxillofacial Surgery. 6 (3): 174–179. doi:10.1016/s0301-0503(78)80087-3. ISSN 0301-0503. PMID 279635.
  28. ^ Woodside, Donald G. (1975-09-01). "The activator in interceptive orthodontics". American Journal of Orthodontics. 68 (3): 343. doi:10.1016/0002-9416(75)90245-6. ISSN 0002-9416.
  29. ^ Harvold, Egil P. (1974). The activator in interceptive orthodontics. C. V. Mosby Co. ISBN 9780801620942.
  30. ^ Burstone, C. J.; James, R. B.; Legan, H.; Murphy, G. A.; Norton, L. A. (April 1978). "Cephalometrics for orthognathic surgery". Journal of Oral Surgery. 36 (4): 269–277. ISSN 0022-3255. PMID 273073.
  31. ^ Arnett, G. W.; Jelic, J. S.; Kim, J.; Cummings, D. R.; Beress, A.; Worley, C. M.; Chung, B.; Bergman, R. (September 1999). "Soft tissue cephalometric analysis: diagnosis and treatment planning of dentofacial deformity". American Journal of Orthodontics and Dentofacial Orthopedics. 116 (3): 239–253. doi:10.1016/S0889-5406(99)70234-9. ISSN 0889-5406. PMID 10474095.
  32. ^ Waldraff, Tassilo. "Home page". Retrieved 2019-11-25.
  33. ^ Björk, A.; Skieller, V. (February 1983). "Normal and abnormal growth of the mandible. A synthesis of longitudinal cephalometric implant studies over a period of 25 years". European Journal of Orthodontics. 5 (1): 1–46. doi:10.1093/ejo/5.1.1. ISSN 0141-5387. PMID 6572593.
  34. ^ Björk, A.; Skieller, V. (April 1977). "Growth of the maxilla in three dimensions as revealed radiographically by the implant method". British Journal of Orthodontics. 4 (2): 53–64. doi:10.1179/bjo.4.2.53. ISSN 0301-228X. PMID 273440. S2CID 8480591.
  35. ^ "The cranial base: The postnatal development of the cranial base studied histologically on human autopsy material". American Journal of Orthodontics. 66 (6): 689–691. 1974-12-01. doi:10.1016/S0002-9416(74)90320-0.
  36. ^ Enlow, Donald H.; Harris, David B. (1964). "A study of the postnatal growth of the human mandible". American Journal of Orthodontics. 50 (1): 25–50. doi:10.1016/S0002-9416(64)80016-6. ISSN 0002-9416.