Jump to content

Rayleigh problem

From Wikipedia, the free encyclopedia
(Redirected from Stokes first problem)

In fluid dynamics, Rayleigh problem also known as Stokes first problem is a problem of determining the flow created by a sudden movement of an infinitely long plate from rest, named after Lord Rayleigh and Sir George Stokes. This is considered as one of the simplest unsteady problems that have an exact solution for the Navier-Stokes equations. The impulse movement of semi-infinite plate was studied by Keith Stewartson.[1]

Flow description

[edit]

Consider an infinitely long plate which is suddenly made to move with constant velocity in the direction, which is located at in an infinite domain of fluid, which is at rest initially everywhere. The incompressible Navier-Stokes equations reduce to[2][3]

where is the kinematic viscosity. The initial and the no-slip condition on the wall are

the last condition is due to the fact that the motion at is not felt at infinity. The flow is only due to the motion of the plate, there is no imposed pressure gradient.

Self-Similar solution

[edit]

The problem on the whole is similar to the one dimensional heat conduction problem. Hence a self-similar variable can be introduced[4]

Substituting this the partial differential equation, reduces it to ordinary differential equation

with boundary conditions

The solution to the above problem can be written in terms of complementary error function

The force per unit area exerted on the plate is

Arbitrary wall motion

[edit]

Instead of using a step boundary condition for the wall movement, the velocity of the wall can be prescribed as an arbitrary function of time, i.e., . Then the solution is given by[5]

Rayleigh's problem in cylindrical geometry

[edit]

Rotating cylinder

[edit]

Consider an infinitely long cylinder of radius starts rotating suddenly at time with an angular velocity . Then the velocity in the direction is given by

where is the modified Bessel function of the second kind. As , the solution approaches that of a rigid vortex. The force per unit area exerted on the cylinder is

where is the modified Bessel function of the first kind.

Sliding cylinder

[edit]

Exact solution is also available when the cylinder starts to slide in the axial direction with constant velocity . If we consider the cylinder axis to be in direction, then the solution is given by

See also

[edit]

References

[edit]
  1. ^ Stewartson, K. T. (1951). On the impulsive motion of a flat plate in a viscous fluid. The Quarterly Journal of Mechanics and Applied Mathematics, 4(2), 182-198.
  2. ^ Batchelor, George Keith. An introduction to fluid dynamics. Cambridge university press, 2000.
  3. ^ Lagerstrom, Paco Axel. Laminar flow theory. Princeton University Press, 1996.
  4. ^ Acheson, David J. (1990) Elementary Fluid Dynamics, Oxford University Press
  5. ^ Dryden, Hugh L., Francis D. Murnaghan, and Harry Bateman. Hydrodynamics. New York: Dover publications, 1956.