Jump to content

4-Aminodiphenylamine

From Wikipedia, the free encyclopedia
4-Aminodiphenylamine
Names
Preferred IUPAC name
N1-Phenylbenzene-1,4-diamine
Other names
  • 4-Aminodiphenylamine
  • p-Aminodiphenylamine
  • N-Phenyl-p-phenylenediamine
  • N-Phenyl-1,4-phenylenediamine
  • PPD
Identifiers
3D model (JSmol)
908935
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.002.684 Edit this at Wikidata
EC Number
  • 202-951-9
241334
RTECS number
  • ST3150000
UNII
UN number 1673
  • InChI=1S/C12H12N2/c13-10-6-8-12(9-7-10)14-11-4-2-1-3-5-11/h1-9,14H,13H2
    Key: ATGUVEKSASEFFO-UHFFFAOYSA-N
  • C1=CC=C(C=C1)NC2=CC=C(C=C2)N
Properties
C12H12N2
Molar mass 184.242 g·mol−1
Appearance purple–black or dark purple
Density 1.09 g/mL
Melting point 75 °C (167 °F; 348 K)
Boiling point 354 °C (669 °F; 627 K)
Hazards
GHS labelling:
GHS07: Exclamation markGHS09: Environmental hazard
Warning
H302, H317, H319, H410
P261, P264, P270, P272, P273, P280, P301+P312, P302+P352, P305+P351+P338, P321, P330, P333+P313, P337+P313, P363, P391, P501
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

4-Aminodiphenylamine is a diphenylamine with an additional amine substituent. This dimer of aniline has various industrial uses, including as a hair dye ingredient, but also has raised concerns about toxicity by skin contact.[1] It is also a starting material for the synthesis of 6PPD, an antiozonant for various rubber products.[2] A colorimetric test for the quantitative analysis of nitrite, at levels below 100 nanograms per milliliter, is based on nitrite-catalyzed coupling of 4-aminodiphenylamine with N,N-dimethylaniline.[3]

Synthesis

[edit]

The most common route of industrial production is by the metal catalysed reaction of aniline with 4‑nitrochlorobenzene to give 4‑nitrodiphenylamine (Buchwald–Hartwig amination):

Subsequent hydrogenation gives 4-aminodiphenylamine.[4] An alternative is the direct reaction of nitrobenzene with aniline via a nucleophilic aromatic substitution of hydrogen (vicarious nucleophilic substitution).[5][6] This again requires a reduction step but is a good example of industrial green chemistry as it eliminates the need for organochlorine starting materials and metal catalysts.

References

[edit]
  1. ^ Khanna, S. K.; Tewari, Pushpa; Joshi, Anil; Singh, G. B. (1987). "Studies on the skin uptake and efflux kinetics of N-phenyl-p-phenylenediamine: an aromatic amine intermediate". International Journal of Cosmetic Science. 9 (3): 137–147. doi:10.1111/j.1467-2494.1987.tb00470.x. PMID 19456976. S2CID 205555627.
  2. ^ Engels, Hans-Wilhelm; Weidenhaupt, Herrmann‐Josef; Pieroth, Manfred; Hofmann, Werner; Menting, Karl‐Hans; Mergenhagen, Thomas; Schmoll, Ralf; Uhrlandt, Stefan (2007). "Rubber, 4. Chemicals and Additives". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a23_365.pub2. ISBN 978-3527306732.
  3. ^ Kadowaki, Ryoichi; Nakano, Shigenori; Kawashima, Takuji (1999). "Sensitive flow injection colorimetry of nitrite by catalytic coupling of N-phenyl-p-phenylenediamine with N,N-dimethylaniline". Talanta. 48 (1): 103–107. doi:10.1016/s0039-9140(98)00227-6. PMID 18967448.
  4. ^ Bochkarev, V.V.; Soroka, L.S.; Bashkin, J.K. (December 2016). "Resource-efficient technology to produce 4-aminodiphenylamine". Resource-Efficient Technologies. 2 (4): 215–224. doi:10.1016/j.reffit.2016.10.011.
  5. ^ Stern, Michael K.; Hileman, Fredrick D.; Bashkin, James K. (November 1992). "The direct coupling of aniline and nitrobenzene: a new example of nucleophilic aromatic substitution for hydrogen". Journal of the American Chemical Society. 114 (23): 9237–9238. doi:10.1021/ja00049a095.
  6. ^ Bashkin, James; Rains, Roger; Stern, Michael (1999). "Taking green chemistry from the laboratory to chemical plant". Green Chemistry. 1 (2): G41. doi:10.1039/GC990G41.