Linear heat detection
| Typical detecting temperature | 68 °C[1] (building) | 180 °C (plant) |
|---|---|---|
| Maximum length | 3000m[1][2] |
Linear heat detection (LHD) (also known as linear detection wire or linear heat detection cable or linear heat) is a very commonly used method of fire detection. It can detect a fire anywhere along the length of the cable, and can be of lengths in excess of a kilometer.
Applications can range from building fire alarm systems to mobile plant machinery.
Operation
[edit]Linear heat detection (LHD) cable is essentially a two-core cable terminated by an end-of-line resistor (resistance varies with application). The two cores are separated by a polymer plastic, that is designed to melt at a specific temperature (commonly 68 °C for building applications[1]), and without which causes the two cores to short. This can be seen as a change in resistance in the wire.
There are a limited states the LHD cable can be in:
- Open-circuit - effectively an infinite resistance
- Fire detection - resistance of the linear heat cable to the short circuit
- Normal operating condition - apparent resistance will be the same as the end-of-line resistor
See also
[edit]References
[edit]- ^ a b c "Linear Heat Detection cable information" (PDF). Retrieved 26 April 2014.
- ^ "Safe Fire Detection, LHD Information". Safe Fire Detection. Retrieved 26 April 2014.