Jump to content

Talk:Segmented mirror

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

Please explain how the segmented mirror works

[edit]

It would be valuable if the article explained how smooth images of distant targets can be collected using a large mirror composed of separate segments which are separated from each other by obvious borders, edges, and angles between them.

The creation of lenses and mirrors for optical instruments typically involves grinding and polishing the optics as smoothly as possible, to high degrees of perfection, and the creation of very precise and even curves. Segmented mirrors are a deviation from this traditional masterful approach since the component segments break the tradition of smoothness and continuous curvature.

How can unbroken views of high optical quality be achieved using bits of mirror stuck together with so many facets, like a mosaic? Is software used to interpolate broken data across the seams, for example, or does the light work with the reflecting facets in some way that forgives the imperfection of the reflecting surface? --O'Dea (talk) 19:39, 22 July 2010 (UTC)[reply]

Its a good place for expansion. "smoothness and continuous curvature" is the reason why they build segmented mirrors. Each small segment can hold an exact shape and all segments can be aligned by active computer control. As for the effects of so many facets, part of this is already covered in Reflecting telescope. All Reflecting telescopes have the image broken up into "facets" because they all have some obstruction blocking the primary mirror causing diffraction effects. These "imperfections" do not break up the image because all surfaces reflect to a common point. But they do reduce contrast and cause diffraction effects. There is a good ref at Optics in astrophysics By Renaud Foy, Françoise-Claude Foy. Fountains of Bryn Mawr (talk) 02:34, 31 July 2010 (UTC)[reply]
[edit]

Hello fellow Wikipedians,

I have just modified one external link on Segmented mirror. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 08:51, 25 January 2018 (UTC)[reply]

The "concept" of segmented mirror telescopes is older than Jerry Nelson

[edit]

In fact a working 180 cm mirror, made of 61 hexagonal segments, was completed in 1952 by Guido Horn D'Arturo, after building a prototype in 1939. The article on the Italian WP has plenty of material and sources on this subject. This should be reflected in the opening of this article.

The 1952 mirror.

--79.55.19.202 (talk) 00:35, 29 December 2021 (UTC)[reply]