User:Shelbyrich/sandbox
![]() | This is a user sandbox of Shelbyrich. A user sandbox is a subpage of the user's user page. It serves as a testing spot and page development space for the user and is not an encyclopedia article. |
The Maracaibo Basin | |
---|---|
![]() Figure 1: Topographic Map of Maracaibo Basin. Note the Sierra de Perija range to the northwest, Mérida Andes range to the southeast, and Lake Maracaibo in the center of the basin. | |
Type | Foreland Basin |
Area | 50,000 km^2 |
Thickness | 3.0-9.0 km |
Location | |
Coordinates | 9.8158° N, 71.5567° W |
Region | Northwestern South America |
Country | Venezuela |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/73/Venezuela_relief_location_map.jpg/300px-Venezuela_relief_location_map.jpg)
The Maracaibo Basin is a foreland basin found in the northwestern corner of Venezuela in South America. Covering over 50,000 km^2[1], it is known to be a hydrocarbon-rich region that has produced over 30 billion bbl of oil with an estimated 44 billion bbl yet to be recovered[2]. The basin is characterized by a large lake, Lake Maracaibo, located near its center. The Maracaibo Basin has a complex tectonic history that dates back to the Jurassic period with multiple evolution stages. Despite its complexity, these major tectonic stages were carefully preserved within its stratigraphy. This makes the Maracaibo Basin one of the most valuable basins for reconstructing South America's early tectonic history.
Geologic setting
[edit]The Maracaibo Basin is surrounded by two mountain ranges, the Méridas Andes to the southeast and the Sierra de Perija to the west, with the Gulf of Venezuela to the north. The basin lies within a region of deformation created by the interactions of the Caribbean and South American plate boundaries. These interactions include the collision of the Caribbean plate with the South American plate in the Cenozoic era, which formed a belt of foreland basins across northern South America.[3]. There are three main fault zones associated with the basin: the Santa Marta-Bucaramanga fault zone, the Boconó fault zone, and the Oca fault zone. These strike-slip zones create a v-shape around the basin which form a smaller plate known as the Maracaibo block. Within this v-shaped wedge, multiple smaller fault zones are present including the Icotea strike-slip fault. Thus the Maracaibo basin geometry is dominated by strike-slip tectonics and subordinate folding with a main syncline, the Maracaibo syncline, striking north-south through the center of Lake Maracaibo[3].
Tectonic history
[edit]The formation of the Maracaibo Basin began 160 Ma with the North American, South American, and Caribbean plates playing key roles in the evolution of the basin. It developed into the present-day foreland basin via multiple stages throughout time: Late Jurassic, Late Cretaceous, Paleocene-Eocene, and the Oligocene-Holocene stages.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/ae/South_American_plates.png/220px-South_American_plates.png)
Late Jurassic
[edit]During the break-up of Pangea, the North American plate began to separate from the South American plate. The two plates rifted away from each other forming the "Proto-Caribbean Seaway", an 1800 km wide region of oceanic crust[3]. As this rifting occurred, the Caribbean plate began its eastward migration from the Pacific region.[4]
Late Cretaceous
[edit]After rifting, the northern edge of the South American plate developed into a passive margin with the Proto-Caribbean Seaway. This stable passive margin allowed for thermal subsidence to occur which began to increase due to the building up of the Cordillera Central range of Colombia[2]. This uplift was initiated by the eastward moving Caribbean plate interacting with the Nazca and northwestern South American plate.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/49/Caribbean_plate_tectonics-en.png/400px-Caribbean_plate_tectonics-en.png)
Paleocene-Eocene
[edit]The Caribbean plate has been migrating eastward from the Pacific region and eventually collided with the South American plate in the middle Paleocene. This collision transformed the passive margin of northern South America into an active margin. The Caribbean plate had subducted significant amounts of oceanic Proto-Caribbean crust by this time and was now subducting beneath the South American crust[3]. This boundary interaction was greatly affecting the region of northwestern South America. Foreland basins formed across the region which received large amount of sediment due to the plate boundary interactions to the north.
Oligocene-Holocene
[edit]The Caribbean plate continued its eastward migration and continued to deform the northwestern regions of South America while also producing deformation along the northeastern regions[5]. As plate migration proceeded, accretion along the South American plate increased. This accretion greatly influenced mountain building of the region. Uplift of the Sierra de Perijas occurred during the Oligocene whereas the Mérida Andes formed later in the middle Miocene[3]. This uplift and subsequent erosion deposited large amount of sediment into the basin. The Maracaibo syncline formed later in this stage due to "inversion of Eocene rift-related structures"[3].
Stratigraphy
[edit]The main periods of sediment deposition follow the same pattern as the tectonic events, where major sedimentary formations coincide with the four tectonic stages mentioned above.
Depositional history
[edit]The break-up of Pangea resulted in the rifting of the Paleozoic metamorphic basement rock. The basement rock formed half-grabens where sediments eroded during the break-up were deposited[6]. These sediments created the metasedimentary rocks of the La Quinta formation[3]. Development of the passive margin occurred after rifting. Characterized by carbonate and shale, the stable passive margin allowed for large amounts of clastic sediment to deposit and stay undisturbed until burial. Some of the most important source rocks come from this stage, including the La Luna and Socuy formations. The timing of the Paleogene collision is clearly recorded in the stratigraphy of the Maracaibo basin. There is an abrupt change in sediment type of the late Cretaceous made evident by the thickly deposited, pelagic shale of the Colon formation. This represents the beginnings of the Caribbean arc collision with the South American plate. As the collision continued, this region shifted from the passive margin stage to the foreland basin stage. These Paleogene sediments are characterized by fluvial and deltaic facies[3]and make up the Misoa formation, fluvial sandstones that act as hydrocarbon reservoirs. Mountain building begins in the late Paleogene, producing mostly continental sandstone facies.
Hydrocarbon resources
[edit]The Maracaibo basin accounts for approximately 15% of proven Venezuelan oil reserves and approximately 50% of Venezuela's crude export capacity.
Oil was discovered in producible quantities in Venezuela in 1914 at the town of Mene Grande in the east central part of the basin. The site of the first well was near a surface oil seep.
Venezuela produces a mix of conventional heavy crude and nonconventional crude derived from bitumen. This latter source, previously too expensive to produce in quantity, now makes up an increasing large percent of Venezuela's oil exports—600,000 of Venezuelas's three million barrels per day in 2006. In the Maracaibo Basin, the balance of reserves is toward its conventional deposits, which make up half of the country's exports. As the country continues shifting toward bitumen production due to its increasing profitability and decreases in conventional reserves, the level of Maracaibo Basin oil production will decrease, while that of the Orinoco Belt and its massive bitumen deposits will increase.
The Bolivar Coastal Field on the eastern shore of Lake Maracaibo produces from Miocene sandstones and Eocene sandstones[7]. West of Maracaibo, the La Paz Field produces from Cretaceous limestones, and oil is found in the stratigraphic traps of Boscan, Los Claros and the Urdaneta fields[7].
References
[edit]- ^ Guzman, J.; Fisher, W. (2006). "Early and middle Miocene depositional history of the Maracaibo Basin, western Venezuela". American Association of Petroleum Geologists Bulletin. 90 (4): 625–655.
- ^ a b Escalona, A.; Mann, P. (2006). "An overview of the petroleum system of Maracaibo Basin". American Association of Petroleum Geologists Bulletin. 90: 657–678.
- ^ a b c d e f g h Mann, P.; Escalona, A.; Castillo, M. (2006). "Regional Geologic and Tectonic Setting of the Maracaibo supergiant basin, western Venezuela". American Association of Petroleum Geologists Bulletin. 90 (4): 445–478.
- ^ Neilla, I.; Kerra (2014). "Vestiges of the proto-Caribbean seaway: Origin of the San Souci Volcanic Group, Trinidad". Tectonophysics. 626: 170–185.
{{cite journal}}
: Text "etal3" ignored (help) - ^ Escalona, A.; Mann, P. (2006). "Tectonics, basin subsidence mechanisms, and paleogeography of the Caribbean-South American plate boundary zone". Marine and Petroleum Geology. 28: 8–39.
- ^ Castillo, M.; Mann (2006). "Cretaceous to Holocene structural and stratigraphic development in south Lake Maracaibo, Venezuela, inferred from well and three-dimensional seismic data". American Association of Petroleum Geologists. 90: 529–565.
- ^ a b Martinez, A.R., Giant Fields of Venezuela, in Geology of Giant Petroleum Fields, AAPG Memoir 14, Halbouty, M.T., editor, Tulsa: American Association of Petroleum Geologists, p. 328.
External links
[edit]![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- History of the Venezuelan oil industry
- OPEC: Venezuela
- US Energy Information Administration: Venezuela
- Johnston Seismic Consulting Ltd. Maracaibo Basin: CSPG International Group Talks and References
Category:Geographical regions of Venezuela Category:Oil fields of Venezuela Category:Physiographic sections