Jump to content

Vorarlberg Railway

Coordinates: 47°13′12″N 9°38′21″E / 47.2201°N 9.6392°E / 47.2201; 9.6392
From Wikipedia, the free encyclopedia

Vorarlberg Railway
Overview
Native nameVorarlbergbahn
Line number5420
LocaleVorarlberg, Austria
Bavaria, Germany
Termini
Service
Route number101 05
Technical
Line length67.746 km (42.095 mi)
Number of tracks
  • 2: Lindau–Lochau-Hörbranz
  • 2: Bregenz–Bludenz
Track gauge1,435 mm (4 ft 8+12 in) standard gauge
Minimum radius321 m (1,053 ft)
Electrification15 kV 16.7 Hz
Operating speed160 km/h (99.4 mph) (maximum)
Maximum incline1.4%
Route map

0.000
Lindau-Insel
S1
Bodenseedamm
Line 5421 from Lindau-Aeschach junction
(Aeschach curve)
1.600
Lindau Langenweg
2.600
Lindau-Reutin
S7
3.800
Lindau Strandbad
5.400
Lindau-Zech
(1944: Lindau-Siebertsdorf)
5.941
Germany
Austria
(Leiblach)
5.988
Unterhochsteg
(until 15 May 1939)
6.500
Lochau-Hörbranz
7.261
Haggen
(until 6 October 1940)
7.700
Langer Stein
(until 15 February 1943)
9.150
Tannenbach
(until 24 November 1971)
9.700
Bregenz Hafen
10.405
Bregenz
S3
398 m above sea level (AA)
Bregenzerwald Railway to Bezau (mostly dismantled)
12.390
Bregenz Riedenburg
13.202
Lauterach Nord
to St. Margrethen (CH)
14.196
Lauterach
to St. Margrethen (CH)
14.707
Wolfurt-Lauterach Süd
16.980
Wolfurt
18.620
Schwarzach in Vorarlberg
(formerly Schwarzach-Wolfurt)
20.248
Haselstauden
22.233
Dornbirn
431 m above sea level (AA)
23.320
Dornbirn-Schoren
25.138
Hatlerdorf
25.827
Siding
30.121
Hohenems
421 m above sea level (AA)
32.214
Altach
(formerly Altach-Bauern)
32.368
Loacker siding
34.760
Götzis
426 m above sea level (AA)
Sattelberg tunnel (81 m)
38.145
Klaus in Vorarlberg
siding (1944: Klaus-Koblach)
38.145
Klaus in Vorarlberg Lst
38.490
siding
39.998
Sulz-Röthis
42.518
Rankweil
463 m above sea level (AA)
44.855
Feldkirch Amberg
46.912
Feldkirch
S2 R5
457 m above sea level (AA)
Schattenburg tunnel (138 and 909 m)
51.387
Frastanz
472 m above sea level (AA)
56.198
Schlins-Beschling
(1944: Schlins)
56.984
Ludesch 1 crossover
57.739
Nenzing
507 m above sea level (AA)
58.849
Hydro Aluminium siding
63.327
Ludesch (formerly Ludesch-Thüringen
(1944: Großwalsertal)) 535 m above sea level (AA)
65.224
Nüziders
67.746
Bludenz
S1S4
558 m above sea level (AA)
Source: Austrian railway atlas[1]

The Vorarlberg Railway (German: Vorarlbergbahn) denotes a railway line running in north-south direction through the Austrian state of Vorarlberg and extending to Lindau (Germany). Its route is similar to the Rheintal/Walgau Autobahn, from Lindau to the border and to Bludenz, where it connects to the Arlberg Railway and Bludenz–Schruns railway (Montafonerbahn) lines. The entire route in Austria is owned and is operated up to Lindau-Insel by the Austrian Federal Railways (Österreichische Bundesbahnen, ÖBB). Services of Vorarlberg S-Bahn, one service of St. Gallen S-Bahn and EuroCity trains of Swiss Federal Railways (SBB) also use a part of the line.

The Vorarlberg Railway is the western continuation of the Arlberg Railway (ÖBB timetable number AT 401) through the Walgau valley and the Vorarlberg section of the Rhine Valley.

Operations

[edit]
Class 4024 running as an S-Bahn service at the entrance of Dornbirn station

As of the December 2023 timetable change, the following services operate on the Vorarlberg railway or sections thereof (S-Bahn services also operate for Bodensee S-Bahn):

History

[edit]

Planning phase

[edit]

Already in 1847, the entrepreneur Carl Ganahl, later the main proponent of the railway construction in the Vorarlberg, recognised the importance of a railway line in the Vorarlberg, although there were many problems with this idea. No mountain railway, which would be needed to cross the Arlberg, had yet been built in Austria and a line with no connection to the Tyrolean areas seemed useless. Moreover, Vorarlberg was not an independent crown land of Austria-Hungary, and thus possessed no representatives in the Imperial Council (Reichsrat) in Vienna.

Operations commenced on the Bavarian Ludwig South-North Railway to Lindau in 1853 and the Swiss lines from Rorschach to Rheineck and from Rheineck to Chur opened in 1857. On the Austrian side the line from Kufstein to Innsbruck via Wörgl was connected to the railway network in 1859. In 1856, the president of the newly formed association now called the Vorarlberg Chamber of Trade and Commerce, Carl Ganahl signed a petition for approval of the preliminary work. He allowed only two years for the preparation of the first detailed design for the project, which he paid for out of his own pocket. In the same year he made a formal application for a license for the project to the Imperial and Royal (kaiserlich und königlich) Ministry of Commerce. There the application was postponed temporarily because consultation had to be held first with the neighbouring states. This meant that it would be as late as 1865 before the signing of treaties could be concluded.

Previously, in 1864, the Ministry of Commerce had submitted a railway construction programme that would also include for the first time the construction of a line from Innsbruck to Dornbirn. In March 1867, the first concept of the Vorarlberg side was submitted, which would also accommodate the construction of a tunnel between St. Anton and Langen. The Imperial Council approved the application in 1867, but construction began only on 1 May 1869.

Implementation and construction

[edit]

After Carl Ganahl prevailed over two other competitors for the construction contract, work began on the construction of the first railway line in the Vorarlberg in October 1870. The bulk of the construction was carried out in 1871 as some sections could only be built after objections had been dealt with. The newly created corporation of the Royal Vorarlberg Railway (k. k. priv. Vorarlberger Bahn), a Vienna-based company received its license from the Companies Registry on 5 May 1871, its statutes were approved on 9 June, its constitution on 3 July and it was entered in the companies register on 8 July.[6] It would have a virtually unlimited capital, since its shares were oversubscribed twenty times.

The first ceremonial run on the Bludenz–Lochau line (neal Bregenz) was hauled by a steam locomotive, which had been given the name of Bregenz, on 30 June 1872. Finally, the line was handed over for public service on 1 July 1872. The railway was finally connected to the rest of the Austrian railway network by the construction of the Arlberg Railway Tunnel in 1884. The link to Buchs and to Lindau opened on 14 October 1872 and the connection to St. Margrethen opened on 23 November 1872. The first continuous express ran on the route on 1 November 1873, running on the route from Zurich Main Station to Munich. The Vorarlberg Railway's connection with the rest of the Austrian railway network also meant the end of its era of independence as it became state-owned.

The railway line was completely electrified in 1954. The section from Bludenz to Feldkirch was duplicated in 1991, followed by the line Feldkirch to Bregenz in 1995. The section from Lochau/Hörbranz to Bregenz-Hafen is still only single-track.

Construction and engineering

[edit]

The main route of the line, with the exception of the Bregenz–Lochau section, is duplicated and fully electrified, while the section from the state border to Lindau-Insel station represents a special case in that the overhead electrical line was built by the ÖBB workshop in Bludenz to German regulations. Until 2020, there was no connection in Germany to the German railway electrical network and this section was supplied with current from Austria. For this reason (and because Lindau-Insel station (formerly called Lindau Hauptbahnhof) is a terminal station) almost all international trains had to switch from the electrical locomotives of Swiss Federal Railways (SBB) or ÖBB to the diesel locomotives of Deutsche Bahn (or vice versa) in Lindau. The lines to Munich and to Friedrichshafen (Bodensee-Gürtelbahn and Wuerttemberg Southline) are now electrified and all trains now run via a rebuilt station at Lindau-Reutin, which does not require reversal.

Feldkirch–Buchs connecting line

[edit]

At the northern end of Feldkirch station a single-track, electrified, 18.5 km line branches to Buchs from Bregenz. Although this line runs through the territory of Liechtenstein and Switzerland, it is completely operated and maintained by the ÖBB.

In Buchs comes it connects with the St. Gallen–St. Margrethen–Sargans–Chur line of the SBB. Together with that part of the main line from Bludenz to Feldkirch, this connecting line is also an important part of the east–west EuroCity connection between Vienna and Zurich. However, a change direction in Buchs and a change locomotives from ÖBB to SBB (or vice versa) is also required.

[edit]

In the area of Lauterach station a triangular junction was created to connect to Switzerland. The link from Feldkirch to Switzerland is only used by freight trains to Switzerland or to the petroleum storage of OMV in Lustenau, while the link from Bregenz is used primarily by passenger trains and is part of the major route between Munich and Zurich.

In St.Margrethen the line connects to the St. Gallen–St. Margrethen–Sargans–Chur line of the SBB. Towards St. Gallen no change in direction of the train is required and most international trains between Switzerland and Germany are drawn by SBB locomotives, which have special pantographs for ÖBB and DB lines.

See also

[edit]

Notes

[edit]
  1. ^ Eisenbahnatlas Österreich (Austrian railway atlas). Schweers + Wall. 2010. pp. 52, 70. ISBN 978-3-89494-138-3.
  2. ^ "Fahrplan REX 1" (PDF). oebb.at. 10 December 2023. Retrieved 31 May 2024.
  3. ^ "Fahrplan S1" (PDF). vmobil.at. 10 December 2023. Retrieved 31 May 2024.
  4. ^ "Fahrplan S3" (PDF). vmobil.at. 10 December 2023. Retrieved 30 May 2024.
  5. ^ "Fahrplan R5 (S5)" (PDF). vmobil.at. 10 December 2023. Retrieved 30 May 2024.
  6. ^ "Firma-Protokollirungen". Amtsblatt zur Wiener Zeitung (in German) (178): 92. 20 July 1871. Retrieved 30 January 2013. (at Austrian National Library in Fraktur script)
[edit]

47°13′12″N 9°38′21″E / 47.2201°N 9.6392°E / 47.2201; 9.6392